How to Run Plesk on Vultr?

9 minutes read

To run Plesk on Vultr, you need to follow these steps:

  1. Sign up on Vultr's website and create a new account.
  2. Deposit funds into your account to get started.
  3. Click on the "Deploy New Server" button to begin the server creation process.
  4. Choose a location for your server data center.
  5. Select an instance type that suits your needs and click on "Deploy Now".
  6. Wait for the server to deploy, which may take a few minutes.
  7. Once the server is deployed, click on the server name to access its settings.
  8. Click on the "Server Details" tab to find your server's IP address.
  9. Open a web browser and enter the server's IP address to access the Plesk installer.
  10. Follow the installer's instructions to complete the installation process.
  11. Once the installation is finished, you can access the Plesk control panel by entering the server's IP address followed by "/admin" in a web browser.
  12. Log in to the Plesk control panel using the administrator username and password that you set during installation.
  13. Configure Plesk as per your requirements and start managing your websites and applications.

It is important to note that these steps are a general guide to running Plesk on Vultr, and there might be slight variations or additional configurations depending on specific server setups or requirements. It is always recommended to refer to the official documentation or seek assistance from the Vultr support team for a more detailed and accurate installation process.

Best Cloud Hosting Services of 2024


Rating is 5 out of 5



Rating is 5 out of 5



Rating is 4.9 out of 5



Rating is 4.9 out of 5


How to set up and manage staging websites in Plesk on Vultr?

To set up and manage staging websites in Plesk on Vultr, you can follow these steps:

  1. Log in to your Vultr account and navigate to your server dashboard.
  2. Click on the server you want to manage and click on the "Manage" button.
  3. In the server management page, click on the "Launch Console" button to access the command line interface of your server.
  4. Once you are in the console, enter your username and password to log in to your Plesk control panel.
  5. In the Plesk control panel, go to the "Websites & Domains" section.
  6. Click on the "Add Domain" button to create a new staging website.
  7. Enter the domain name for your staging website and configure the desired settings (e.g., document root, PHP version, SSL certificate, etc.).
  8. Click on the "Hosting Settings" option to configure additional settings for your staging website.
  9. In the "Hosting Settings" page, you can set up the staging environment by enabling the "Staging" checkbox.
  10. Specify the staging URL and the production website that you want to clone.
  11. Click on the "OK" button to save your changes and set up the staging environment.
  12. Now, you can access your staging website using the specified staging URL.
  13. To manage your staging website, you can use the various tools and features in the Plesk control panel, such as file manager, database management, FTP access, etc.
  14. Once you are satisfied with the changes and updates made on the staging website, you can deploy them to the production website by clicking on the "Publish changes" button in the staging environment settings.
  15. Plesk will then synchronize the changes from the staging environment to the production website, allowing you to update your live site.

By following these steps, you can easily set up and manage staging websites in Plesk on Vultr.

How to configure firewall settings in Plesk on Vultr?

To configure firewall settings in Plesk on Vultr, follow these steps:

  1. Log in to the Plesk control panel.
  2. Go to the "Tools & Settings" tab on the left-hand side.
  3. Under the "Security" group, click on "Firewall".
  4. On the Firewall page, you can enable or disable the firewall by clicking on the "Enable Firewall Rules Management" checkbox.
  5. Once the firewall is enabled, you can start adding or modifying rules.
  6. To add a new rule, click on the "Add Custom Rule" button.
  7. In the pop-up window, you can specify the rule parameters such as the rule name, direction, action, IP addresses, and ports.
  8. After adding the rule, click on the "OK" button to save it.
  9. You can also modify or delete existing rules by selecting them and clicking on the "Modify Rule" or "Delete Rule" buttons.
  10. To allow or deny access to specific IP addresses, go to the "IP Address Banning" section. Here, you can add IP addresses to be banned or allowed.
  11. Click on the "Banned IP Addresses" tab to see the list of currently banned IP addresses.
  12. To ban or allow an IP address, click on the "Ban" or "Unban" button accordingly.
  13. Click on the "OK" button to save any changes made to the firewall settings.

How to set up cron jobs in Plesk on Vultr?

To set up cron jobs in Plesk on Vultr, you can follow these steps:

  1. Log in to the Plesk control panel using your Vultr credentials.
  2. Once logged in, navigate to the "Websites & Domains" tab.
  3. Find and click on the domain name for which you want to set up a cron job.
  4. Scroll down to the "Additional Tools" section and click on "Scheduled Tasks".
  5. On the resulting page, click on the "Add Task" button.
  6. In the "Task Type" section, select "Run a command".
  7. In the "Command" field, enter the command you want to run as a cron job. For example, if you want to run a PHP script located at, you can use the following command: /usr/local/bin/php -f /var/www/vhosts/
  8. In the "Run" section, select the frequency at which you want the command to run. You can choose from options like "Minute", "Hourly", "Daily", etc. Alternatively, you can set a custom schedule using the "Custom value" option.
  9. In the "Notify" section, select whether you want to receive a notification when the command completes execution.
  10. Once you have configured the cron job settings, click on the "OK" button to save the changes.

That's it! You have successfully set up a cron job in Plesk on Vultr. The command you specified will now run at the specified frequency.

What are the system requirements for running Plesk on Vultr?

The system requirements for running Plesk on Vultr are as follows:

  1. Operating System: CentOS 7 or CentOS 8 Ubuntu 18.04 LTS or Ubuntu 20.04 LTS Debian 9 or Debian 10
  2. CPU: Recommended: 2 or more cores Minimum: 1 core
  3. RAM: Recommended: 2 GB or more Minimum: 2 GB
  4. Disk Space: Recommended: 40 GB or more Minimum: 10 GB
  5. Network: IPv4 address
  6. Firewall: The following ports should be open: 21, 22, 25, 53, 80, 110, 143, 443, 465, 587, 993, 995, 8443, 4190

Please note that these are the general system requirements, and they may vary depending on the specific usage and number of websites or applications you plan to host on your Plesk server. It is always recommended to check the official Plesk documentation for the most up-to-date system requirements.

What are the available security measures in Plesk on Vultr?

Plesk, a popular control panel, provides various security measures to protect your server on Vultr. Some of these security measures include:

  1. Firewall Management: Plesk offers a built-in firewall tool that allows you to filter network traffic and secure the server from unauthorized access. You can configure firewall rules to allow or block specific IP addresses, ports, or services.
  2. Fail2Ban: Plesk supports Fail2Ban, an intrusion prevention software that automatically detects and blocks suspicious activities like brute-force attacks. It monitors log files for malicious behavior and temporarily bans the source IP addresses.
  3. SSL/TLS Certificates: Plesk provides easy installation, management, and renewal of SSL/TLS certificates for securing web traffic with HTTPS. It also supports Let's Encrypt, a free and automated certificate authority.
  4. Security Advisor: Plesk includes a Security Advisor tool that analyzes the server's settings, web applications, and configurations. It provides recommendations to enhance security and helps identify potential vulnerabilities.
  5. ModSecurity: Plesk integrates ModSecurity, an open-source web application firewall (WAF). It helps protect web applications by filtering out malicious HTTP requests and preventing attacks like SQL injection, cross-site scripting (XSS), etc.
  6. Antivirus and Antispam: Plesk incorporates antivirus and antispam features to protect against malware and spam emails. It includes tools to scan and clean infected files.
  7. User Permissions: Plesk allows you to assign different levels of administrative access to users. You can define specific permissions for each user, limiting their capabilities and reducing the risk of unauthorized changes.
  8. Server Hardening: Plesk offers server hardening options, such as disabling unnecessary services, enabling secure protocols, and configuring secure FTP connections (SFTP) for enhanced security.
  9. Backup and Restore: Plesk provides automated backup and restore functionality. Regular backups help protect your data in case of any security incidents or unexpected events.

It's crucial to regularly update Plesk and its associated components to ensure you have the latest security patches and improvements. Additionally, following best practices like using strong passwords and keeping software up to date will further enhance the security of your Plesk server on Vultr.

Facebook Twitter LinkedIn Telegram Whatsapp

Related Posts:

To deploy React.js on Vultr, follow these steps:Create a Vultr account: Start by signing up for a Vultr account on their website. Once you've created an account and logged in, you'll have access to the Vultr dashboard. Create a new server: Inside the V...
To publish Plesk on Liquid Web, you will need to follow a few steps. Firstly, log in to your Liquid Web account and navigate to the control panel. From there, select the "Manage" button next to your desired server.Once you are in the server management ...
To deploy Joomla on Vultr, you can follow the following steps:Sign in to your Vultr account or create a new one if you don't have an account already.On the Vultr dashboard, click on the "Deploy New Server" button.Select a preferred server location ...
To launch Plesk on web hosting, follow the following steps:Choose a hosting provider: Select a hosting provider that offers Plesk as one of their hosting control panel options. Ensure that the hosting provider meets your requirements in terms of price, perform...
To install Grafana on Vultr, you can follow these steps:SSH into your Vultr server using a SSH client.Update the package repository by running the command: sudo apt update Install the necessary dependencies by running the command: sudo apt install -y apt-trans...
To run React.js on 000Webhost, follow these steps:Set up a new project: Create a new React.js project on your local machine using the create-react-app command or any other method you prefer. Build your React app: Open your terminal or command prompt and naviga...